The Luxe Lather Portable Shampoo Sink is engineered to bring full shampoo functionality to spaces where plumbing is limited, restricted, or completely unavailable. Whether you work in a salon suite, run a licensed home salon, or teach in a cosmetology school, the Luxe Lather provides professional performance without construction or installation costs.

This step-by-step guide walks you through exactly how to set up your unit for proper electric connection, water flow, hot water, safety, and best practices. 

Why Luxe Lather Solves Common Problems in Salon Suites and Small Spaces

Many salon suites do not include plumbed shampoo bowls. Landlords often prohibit plumbing modifications, or the cost to install a traditional bowl is too high for independent stylists. Cosmetology schools and home salons face similar barriers, needing equipment that is safe, compliant, and portable.

The Luxe Lather solves these issues because it provides:

• Full shampoo performance without plumbing
• Strong water pressure suitable for rinsing color and treatments
• Consistent hot water output for multiple clients
• Plug-and-play installation with no contractors required
• A deep ergonomic bowl for client comfort
• Mobility to reposition or reconfigure your layout
• Safety-tested electrical components for professional use

Most importantly, it offers the look and feel of a traditional shampoo bowl—without the need for construction or permits.

Step-By-Step Luxe Lather Setup Instructions

The setup process is straightforward and can be completed in minutes. These steps reflect the official guide and ensure safe use of the pump and hot water heater.

Step 1: Remove the Water Tanks

Inside the cabinet, remove both tanks from the right side:

• The tall blue drainage jug
• The clear blue six-gallon fresh water jug

This gives you access to the hoses and interior components.

Step 2: Connect Power Safely

Push the black power cord through the cabinet’s side opening and plug it into a standard grounded outlet.

Press both the test and reset buttons on the GFCI box to confirm power flow.
This ensures the unit is protected and operating safely.

Step 3: Fill the Fresh Water Tank

Fill the clear blue jug with clean water.
Reinsert it into the cabinet and make sure the pump hose rests fully at the bottom—this is critical for maintaining consistent flow.

Step 4: Reinstall the Drain Tank

Place the tall blue drainage jug back inside the cabinet.
Insert the white drain hose securely into the jug so wastewater is captured properly during use.

Step 5: Prime the System (Most Important Step)

This step protects the hot water heater by filling it before the heater is turned on.

• Pull the faucet handle up
• Hold the sprayer firmly
• Plug in only the pump
• Let water run until the flow is smooth with no sputtering
• Approximately half of the fresh tank water may be used to fill the heater
• Push the faucet handle down when flow is steady

Priming ensures the heater tank fills completely and prevents overheating or internal damage.

Step 6: Activate the Hot Water Heater

Once priming is complete and the system is full:

• Plug in the hot water heater
• Turn the temperature dial to three-quarters
• Allow 10 to 15 minutes for the water to heat
• Adjust temperature to your preference

The Luxe Lather heater is designed for stable, consistent hot water suitable for repeated client services.

Best Practices for Daily Use

To keep your Luxe Lather performing at its highest level, follow these maintenance and usage recommendations:

• Always prime the system before turning the heater on
• Empty the drain tank before it becomes too full
• Use clean water in the fresh tank daily
• Keep the pump hose fully submerged
• Ensure hoses are straight, not kinked
• Do not run the heater without water in the system
• Test the GFCI regularly
• Rinse tanks weekly to maintain hygiene

These simple habits ensure longevity and reliable performance in busy service environments.

Any questions or comments? Please Contact us today for trouble shooting or help setting up your Luxe Lather!